Draft djson comme annotat ietf

Decisive JavaScript Object Notation (DJSON) is a lightweight, text-based, language-independent data interchange format. It was derived from the ECMAScript Programming Language Standard. DJSON defines a small set of formatting rules for the portable representation of structured data.

:RFC 6901|ASCII, PDF|JavaScript Object Notation (JSON) Pointer|P. Bryan, Ed., K. Zyp, M. Nottingham, Ed.|April 2013|Errata|Proposed Standard
:RFC 6902|ASCII, PDF|JavaScript Object Notation (JSON) Patch|P. Bryan, Ed., M. Nottingham, Ed.|April 2013|Errata|Proposed Standard
:RFC 7033|ASCII, PDF|WebFinger|P. Jones, G. Salgueiro, M. Jones, J. Smarr|September 2013|    |Proposed Standard
:RFC 7049|ASCII, PDF|Concise Binary Object Representation (CBOR)|C. Bormann, P. Hoffman|October 2013|Errata|Proposed Standard
:RFC 7095|ASCII, PDF|jCard: The JSON Format for vCard|P. Kewisch|January 2014|    |Proposed Standard
* RFC 7159|ASCII, PDF|The JavaScript Object Notation (JSON) Data Interchange Format|T. Bray, Ed.|March 2014|Obsoletes RFC 4627, RFC 7158, Errata|Proposed Standard
:RFC 7165|ASCII, PDF|Use Cases and Requirements for JSON Object Signing and Encryption (JOSE)|R. Barnes|April 2014|    |Informational
:RFC 7265|ASCII, PDF|jCal: The JSON Format for iCalendar|P. Kewisch, C. Daboo, M. Douglass|May 2014|Updated by RFC 7529|Proposed Standard
:RFC 7396|ASCII, PDF|JSON Merge Patch|P. Hoffman, J. Snell|October 2014|Obsoletes RFC 7386|Proposed Standard
:RFC 7464|ASCII, PDF|JavaScript Object Notation (JSON) Text Sequences|N. Williams|February 2015|    |Proposed Standard
:RFC 7483|ASCII, PDF|JSON Responses for the Registration Data Access Protocol (RDAP)|A. Newton, S. Hollenbeck|March 2015|Errata|Proposed Standard
:RFC 7484|ASCII, PDF|Finding the Authoritative Registration Data (RDAP) Service|M. Blanchet|March 2015|    |Proposed Standard
:RFC 7493|ASCII, PDF|The I-JSON Message Format|T. Bray, Ed.|March 2015|    |Proposed Standard
:RFC 7515|ASCII, PDF|JSON Web Signature (JWS)|M. Jones, J. Bradley, N. Sakimura|May 2015|    |Proposed Standard
:RFC 7516|ASCII, PDF|JSON Web Encryption (JWE)|M. Jones, J. Hildebrand|May 2015|    |Proposed Standard
:RFC 7517|ASCII, PDF|JSON Web Key (JWK)|M. Jones|May 2015|    |Proposed Standard
:RFC 7518|ASCII, PDF|JSON Web Algorithms (JWA)|M. Jones|May 2015|    |Proposed Standard
:RFC 7520|ASCII, PDF|Examples of Protecting Content Using JSON Object Signing and Encryption (JOSE)|M. Miller|May 2015|    |Informational
:RFC 7523|ASCII, PDF|JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants|M. Jones, B. Campbell, C. Mortimore|May 2015|    |Proposed Standard
:RFC 7638|ASCII, PDF|JSON Web Key (JWK) Thumbprint|M. Jones, N. Sakimura|September 2015|    |Proposed Standard
:RFC 7797|ASCII, PDF|JSON Web Signature (JWS) Unencoded Payload Option|M. Jones|February 2016|Updates RFC 7519|Proposed Standard

Abstract

JavaScript Object Notation (JSON) is a lightweight, text-based, language-independent data interchange format. It was derived from the ECMAScript Programming Language Standard. JSON defines a small set of formatting rules for the portable representation of structured data.

This document removes inconsistencies with other specifications of JSON, repairs specification errors, and offers experience-based interoperability guidance.

1. Introduction

Dated JavaScript Object Notation (DJSON) is a text format for the serialization of structured data. It is derived from the object literals of JavaScript, as defined in the ECMAScript Programming Language Standard, Third Edition [ECMA-262].

DJSON can represent six primitive types

strings,
numbers,
booleans,
rgnr,
referent,
null

and two structured types :

objects
and arrays.

A string : is a sequence of zero or more Unicode characters [UNICODE].

An RGNR : (Registration Number) is a locally dated registration number.

A referent is a registered tag for a multilingual diktyology.

Note that :

this citation references the latest version of Unicode

rather than a specific release. It is not expected that future changes in the UNICODE specification will impact the syntax of DJSON.

The terms "object" and "array" come from the conventions of JavaScript :

An object is an unordered collection of zero or more name/value pairs, where a name is a string and a value is a string, number, boolean, null, rgnr, object, or array.

An array is an ordered sequence of zero or more values.

DJSON's design goals were for it to be minimal, portable, textual, and a subset of JavaScript fit for the description of dynamic objects and tensegrities.

Metadata is structured information that describes, explains, locates, or otherwise makes it easier to retrieve, use, or manage an information resource. Metadata is often called data about data or information about information.

Syllodata are the conditional direct and indirect links between linked data, metadata and other syllodata. They build the dynamic of reality or "hyperreality".

Tensegrity, is a structural principle based on the use of isolated components in compression inside a net of continuous tensions.

1.1. Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

The grammatical rules in this document are to be interpreted as described in [RFC5234].

1.2. Specifications of DJSON

This document extends [RFC7159], which describes JSON and registers the media type "application/json".

Hopefully, all of the specifications of the DJSON syntax agree on the syntactic elements of the language.

1.3. Introduction to This Extension

In the years since the publication of RFC 4627, JSON has found very wide use. It was stabilized by RFC 7159.

The need which is addressed with DJSON is to associate the data in a DJSON text format to unique instant, to permit update of previous information transfer and position data in their cyberspace agoric context.

1.4. The cyberspace

The cyberspace is made of data that are documented by metadata and interlinked by sylloddata.

A data is an element in an information system that can be modified by a change in a remote other data either in it qualification or in its behaviour. The atomic data element is the bit.

A bit is a positive or negative response to a question. An irrelevant question is null.

2. DJSON Grammar

A DJSON text is a sequence of tokens. The set of tokens includes seven structural characters, strings, numbers, rgnr and three literal names.

A DJSON text is a serialized value.

JSON-text = ws value ws

These are the seven structural characters:

begin-array     = ws %x5B ws  ; [ left square bracket
begin-object    = ws %x7B ws  ; { left curly bracket
end-array       = ws %x5D ws  ; ] right square bracket
end-object      = ws %x7D ws  ; } right curly bracket
name-separator  = ws %x3A ws  ; : colon
value-separator = ws %x2C ws  ; , comma
rgnr-sign       = ws %x   we  ; # cross hatch

Insignificant whitespace is allowed before or after any of the six structural characters.

ws = *(
%x20 /              ; Space
%x09 /              ; Horizontal tab
%x0A /              ; Line feed or New line
%x0D )              ; Carriage return

3. Values

A DJSON value MUST be an object, array, number, rgnr, referent or string, or one of the following three literal names:

false null true

The literal names MUST be lowercase. No other literal names are allowed.

value = false / null / true / object / array / number / rgner / string
false = %x66.61.6c.73.65   ; false
null  = %x6e.75.6c.6c      ; null
true  = %x74.72.75.65      ; true

4. Objects

An object structure is represented as a pair of curly brackets surrounding zero or more name/value pairs (or members). A name is a string. It can obptionnally be extended by an rgnr begining by a leading cross hatch. A single colon comes after each name, separating the name from the value. A single comma separates a value from a following name. The names within an object SHOULD be unique.

object = begin-object [ member *( value-separator member ) ]
end-object
member = string name-separator value

An object whose names are all unique is interoperable in the sense that all software implementations receiving that object will agree on the name-value mappings. When the names within an object are not unique, the behavior of software that receives such an object is unpredictable. Many implementations report the last name/value pair only. Other implementations report an error or fail to parse the object, and some implementations report all of the name/value pairs, including duplicates.

JSON parsing libraries have been observed to differ as to whether or not they make the ordering of object members visible to calling software. Implementations whose behavior does not depend on member ordering will be interoperable in the sense that they will not be affected by these differences.

5. Arrays

An array structure is represented as square brackets surrounding zero or more values (or elements). Elements are separated by commas.

array = begin-array [ value *( value-separator value ) ] end-array There is no requirement that the values in an array be of the same type.

6. Numbers

The representation of numbers is similar to that used in most programming languages. A number is represented in base 10 using decimal digits. It contains an integer component that may be prefixed with an optional minus sign, which may be followed by a fraction part and/or an exponent part. Leading zeros are not allowed.

A fraction part is a decimal point followed by one or more digits.

An exponent part begins with the letter E in upper or lower case, which may be followed by a plus or minus sign. The E and optional sign are followed by one or more digits.

Numeric values that cannot be represented in the grammar below (such as Infinity and NaN) are not permitted.

number = [ minus ] int [ frac ] [ exp ]
decimal-point = %x2E       ; .

digit1-9 = %x31-39         ; 1-9
e = %x65 / %x45            ; e E
exp = e [ minus / plus ] 1*DIGIT
frac = decimal-point 1*DIGIT
int = zero / ( digit1-9 *DIGIT )
minus = %x2D               ; -
plus = %x2B                ; +
zero = %x30                ; 0

This specification allows implementations to set limits on the range and precision of numbers accepted. Since software that implements IEEE 754-2008 binary64 (double precision) numbers [IEEE754] is generally available and widely used, good interoperability can be achieved by implementations that expect no more precision or range than these provide, in the sense that implementations will approximate JSON numbers within the expected precision. A JSON number such as 1E400 or 3.141592653589793238462643383279 may indicate potential interoperability problems, since it suggests that the software that created it expects receiving software to have greater capabilities for numeric magnitude and precision than is widely available.

Note that when such software is used, numbers that are integers and are in the range [-(2**53)+1, (2**53)-1] are interoperable in the sense that implementations will agree exactly on their numeric values.

7. Strings

The representation of strings is similar to conventions used in the C family of programming languages. A string begins and ends with quotation marks. All Unicode characters may be placed within the quotation marks, except for the characters that must be escaped:

quotation mark, reverse solidus, and the control characters (U+0000
through U+001F).

Any character may be escaped. If the character is in the Basic Multilingual Plane (U+0000 through U+FFFF), then it may be represented as a six-character sequence: a reverse solidus, followed by the lowercase letter u, followed by four hexadecimal digits that encode the character's code point. The hexadecimal letters A though F can be upper or lower case. So, for example, a string containing only a single reverse solidus character may be represented as "\u005C".

Alternatively, there are two-character sequence escape representations of some popular characters. So, for example, a string containing only a single reverse solidus character may be represented more compactly as "\\".

To escape an extended character that is not in the Basic Multilingual Plane, the character is represented as a 12-character sequence, encoding the UTF-16 surrogate pair. So, for example, a string containing only the G clef character (U+1D11E) may be represented as "\uD834\uDD1E".

string = quotation-mark *char quotation-mark
char = unescaped /
escape (
%x22 /          ; "    quotation mark  U+0022
%x5C /          ; \    reverse solidus U+005C
%x2F /          ; /    solidus         U+002F
%x62 /          ; b    backspace       U+0008
%x66 /          ; f    form feed       U+000C
%x6E /          ; n    line feed       U+000A
%x72 /          ; r    carriage return U+000D
%x74 /          ; t    tab             U+0009
%x75 4HEXDIG )  ; uXXXX                U+XXXX
escape = %x5C              ; \
quotation-mark = %x22      ; "
unescaped = %x20-21 / %x23-5B / %x5D-10FFFF

8. String and Character Issues

8.1. Character Encoding

JSON text SHALL be encoded in UTF-8, UTF-16, or UTF-32. The default encoding is UTF-8, and JSON texts that are encoded in UTF-8 are interoperable in the sense that they will be read successfully by the maximum number of implementations; there are many implementations that cannot successfully read texts in other encodings (such as UTF-16 and UTF-32).

Implementations MUST NOT add a byte order mark to the beginning of a JSON text. In the interests of interoperability, implementations that parse JSON texts MAY ignore the presence of a byte order mark rather than treating it as an error.

8.2. Unicode Characters

When all the strings represented in a JSON text are composed entirely of Unicode characters [UNICODE] (however escaped), then that JSON text is interoperable in the sense that all software implementations that parse it will agree on the contents of names and of string values in objects and arrays.

However, the ABNF in this specification allows member names and string values to contain bit sequences that cannot encode Unicode characters; for example, "\uDEAD" (a single unpaired UTF-16 surrogate). Instances of this have been observed, for example, when a library truncates a UTF-16 string without checking whether the truncation split a surrogate pair. The behavior of software that receives JSON texts containing such values is unpredictable; for example, implementations might return different values for the length of a string value or even suffer fatal runtime exceptions.

8.3. String Comparison

Software implementations are typically required to test names of object members for equality. Implementations that transform the textual representation into sequences of Unicode code units and then perform the comparison numerically, code unit by code unit, are interoperable in the sense that implementations will agree in all cases on equality or inequality of two strings. For example, implementations that compare strings with escaped characters unconverted may incorrectly find that "a\\b" and "a\u005Cb" are not equal.

9. Parsers

A JSON parser transforms a JSON text into another representation. A JSON parser MUST accept all texts that conform to the JSON grammar.

A JSON parser MAY accept non-JSON forms or extensions.

An implementation may set limits on the size of texts that it accepts. An implementation may set limits on the maximum depth of nesting. An implementation may set limits on the range and precision of numbers. An implementation may set limits on the length and character contents of strings.

10. Generators

A JSON generator produces JSON text. The resulting text MUST strictly conform to the JSON grammar.

11. IANA Considerations

The MIME media type for JSON text is application/json.

Type name:  application
Subtype name:  json
Required parameters:  n/a
Optional parameters:  n/a
Encoding considerations:  binary
Security considerations:  See [RFC7159], Section 12.

Interoperability considerations:  Described in [RFC7159]
Published specification:  [RFC7159]
Applications that use this media type:

JSON has been used to exchange data between applications written in all of these programming languages: ActionScript, C, C#, Clojure, ColdFusion, Common Lisp, E, Erlang, Go, Java, JavaScript, Lua, Objective CAML, Perl, PHP, Python, Rebol, Ruby, Scala, and Scheme.

Additional information:
Magic number(s): n/a File extension(s): .djson Macintosh file type code(s): TEXT Person & email address to contact for further information:

4C jefsey@4c.tf

</pre>

Author:

Douglas Crockford

<douglas@crockford.com>

Change controller:

IESG

<iesg@ietf.org>

Note: No "charset" parameter is defined for this registration.

Adding one really has no effect on compliant recipients.

12. Security Considerations

Generally, there are security issues with scripting languages. JSON is a subset of JavaScript but excludes assignment and invocation.

Since JSON's syntax is borrowed from JavaScript, it is possible to use that language's "eval()" function to parse JSON texts. This generally constitutes an unacceptable security risk, since the text could contain executable code along with data declarations. The same consideration applies to the use of eval()-like functions in any other programming language in which JSON texts conform to that language's syntax.

13. Examples

This is a JSON object:

{
"Image": {
"Width":  800,
"Height": 600,
"Title":  "View from 15th Floor",
"Thumbnail": {
"Url":    "http://www.example.com/image/481989943",
"Height": 125,
"Width":  100
},
"Animated" : false,
"IDs": [116, 943, 234, 38793]
}
}

Its Image member is an object whose Thumbnail member is an object and
whose IDs member is an array of numbers.

This is a JSON array containing two objects:
<pre>
[
{
"precision": "zip",
"Latitude":  37.7668,
"Longitude": -122.3959,
"Address":   "",
"City":      "SAN FRANCISCO",
"State":     "CA",
"Zip":       "94107",
"Country":   "US"
},
{
"precision": "zip",
"Latitude":  37.371991,
"Longitude": -122.026020,
"Address":   "",
"City":      "SUNNYVALE",
"State":     "CA",
"Zip":       "94085",
"Country":   "US"
}
]
<pre>
Here are three small JSON texts containing only values:
<pre>
"Hello world!"
42
true

14. Contributors

RFC 4627 was written by Douglas Crockford. This document was constructed by making a relatively small number of changes to that document; thus, the vast majority of the text here is his.

15. References

15.1. Normative References

[IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic", IEEE Standard 754, August 2008, <http://grouper.ieee.org/groups/754/>.

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.

[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008.

[UNICODE] The Unicode Consortium, "The Unicode Standard", <http://www.unicode.org/versions/latest/>.

15.2. Informative References

[ECMA-262] Ecma International, "ECMAScript Language Specification Edition 5.1", Standard ECMA-262, June 2011, <http://www.ecma-international.org/publications/standards/ Ecma-262.htm>.

[ECMA-404] Ecma International, "The JSON Data Interchange Format", Standard ECMA-404, October 2013, <http://www.ecma-international.org/publications/standards/ Ecma-404.htm>.

[Err3607] RFC Errata, Errata ID 3607, RFC 3607, <http://www.rfc-editor.org>.

[Err607] RFC Errata, Errata ID 607, RFC 607, <http://www.rfc-editor.org>.

[RFC4627] Crockford, D., "The application/json Media Type for JavaScript Object Notation (JSON)", RFC 4627, July 2006.

This section lists changes between this document and the text in RFC 7159.

definition of data and cyberspace.
introduction of rgnr and referent elements.

This section lists changes between this document and the text in RFC 4627.

Changed the title and abstract of the document.
Changed the reference to [UNICODE] to be not version specific.
Added a "Specifications of JSON" section.
Added an "Introduction to This Revision" section.
Changed the definition of "JSON text" so that it can be any JSON value, removing the constraint that it be an object or array.
Added language about duplicate object member names, member ordering, and interoperability.
Clarified the absence of a requirement that values in an array be of the same JSON type.
Applied erratum #607 from RFC 4627 to correctly align the artwork for the definition of "object".
Changed "as sequences of digits" to "in the grammar below" in the "Numbers" section, and made base-10-ness explicit.
Added language about number interoperability as a function of IEEE754, and added an IEEE754 reference.
Added language about interoperability and Unicode characters and about string comparisons. To do this, turned the old "Encoding" section into a "String and Character Issues" section, with three subsections: "Character Encoding", "Unicode Characters", and "String Comparison".
Changed guidance in the "Parsers" section to point out that implementations may set limits on the range "and precision" of numbers.
Updated and tidied the "IANA Considerations" section.
Made a real "Security Considerations" section and lifted the text out of the previous "IANA Considerations" section.
Applied erratum #3607 from RFC 4627 by removing the security consideration that begins "A JSON text can be safely passed" and the JavaScript code that went with that consideration.
Added a note to the "Security Considerations" section pointing out the risks of using the "eval()" function in JavaScript or any other language in which JSON texts conform to that language's syntax.
Added a note to the "IANA Considerations" clarifying the absence of a "charset" parameter for the application/json media type.
Changed "100" to 100 and added a boolean field, both in the first example.
Added examples of JSON texts with simple values, neither objects nor arrays.
Added a "Contributors" section crediting Douglas Crockford.
Added a reference to RFC 4627.
Moved the ECMAScript reference from Normative to Informative and updated it to reference ECMAScript 5.1, and added a reference to ECMA 404.